Canyon 4WD L5-3.7L (2007)
4. If equipped with an automatic transmission perform the following steps, disengage the EVAP/fuel pipe clips (1) from the oil level indicator tube
bracket and the engine wiring harness bracket.
5. Raise and support the vehicle. Refer to Vehicle Lifting.
6. Disengage the EVAP/fuel pipe clip (2) from the fuel pipe bracket.
7. Disengage the EVAP/fuel pipe clip (3) from the transmission range selector lever bracket.
8. If equipped with a manual transmission perform the following steps, disengage the EVAP/fuel pipe clips (1) from the oil level indicator tube
bracket and the engine wiring harness bracket.
9. Raise and support the vehicle. Refer to Vehicle Lifting.
10. Disengage the EVAP/fuel pipe clips (1 and 2) from the fuel pipe brackets.