Canyon 4WD L5-3.7L (2007)
Fuel Filler Hose: Service and Repair
Fuel Tank Filler Hose Replacement
Removal Procedure
1. Partially drain the fuel tank below the level of the fuel fill tube. Refer to Fuel Tank Draining.
2. Raise and support the vehicle, high enough to access the fuel fill hose through the wheelhouse liner. Refer to Vehicle Lifting.
3. Remove the left rear pickup box wheelhouse liner.
4. Remove the fuel fill hose ground strap bolt.
5. Remove the ground strap from the frame.
6. Loosen the fuel fill hose clamp (2) at the fuel tank.
7. Disconnect the evaporative emission (EVAP) line (1) quick connect fitting from the fill tube vent line.
8. Separate the fuel fill hose from the fuel tank.
