Canyon 4WD L5-3.7L (2007)
4. Install the fuel fill hose to the fuel tank.
5. Connect the fuel tank EVAP line (1) quick connect fitting to the fill tube vent line.
6. Tighten the fuel fill hose clamp (2) at the fuel tank.
Tighten the clamp to 2.5 N.m (22 lb in).
7. Install the ground strap to the frame. Ensure that the anti rotation tab is inserted into the hole in the frame.
8. Install the fuel fill hose ground strap bolt.
Tighten the bolt to 9 N.m (80 lb in).
9. Install the left rear pickup box wheelhouse liner.
10. Lower the vehicle.
11. Refill the fuel tank.
12. Install the fuel fill cap.
