Canyon 4WD L5-3.7L (2007)
Notice: Refer to Fastener Notice.
2. Install the bolt which retains the seat belt retractor assembly to the body.
Tighten the rear seat belt retractor bolt to 52.5 N.m (39 lb ft).
3. Install the rear seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.
Tighten the rear seat belt upper guide bolt to 52.5 N.m (39 lb ft).
4. Install the rear seat belt upper guide shoulder bolt trim cover.
5. Install the body rear corner trim panel.
6. Install the rear seat belt anchor bolt. Ensure that the seat belt webbing is not twisted.
Tighten the rear seat belt anchor bolt to 52.5 N.m (39 lb ft).
