Canyon 4WD L5-3.7L (2007)
7. Connect the seat belt buckle electrical connector (1).
8. Connect the wiring harness (2) to the seat position switch.
9. Position the seat back assembly on the seat cushion assembly.
10. Install the 2 bolts (1) securing the seat recliner to the seat adjuster.
11. Install the lumbar adjustment mechanism (1) to the seat adjuster with the 2 screws (2).
12. Install the lumbar cable to the lumbar adjustment mechanism.
13. Install the lumbar knob by pushing the knob straight onto the shaft, if equipped.
14. Install the recliner handle.
