Canyon 4WD L5-3.7L (2007)
Important: If the location of the original plug weld holes can not be determined, or if structural weld-thru adhesive is present, space the
plug weld holes every 40 mm (11/2 in) apart.
1. Drill 8 mm (5/16 in) plug weld holes as necessary in locations noted from the original battery tray.
2. Prepare all mating surfaces as necessary.
3. Apply 3M(R) Weld-Thru coating P/N 05916 or equivalent to all mating surfaces
4. Position the battery tray.