Canyon 4WD L5-3.7L (2007)
Pinion Bearing: Service and Repair
Rear Drive Axle
Drive Pinion Bearings Replacement
Tools Required
^
J 7817 Outer Bearing Race Installer
^
J 8092 Universal Driver Handle- 3/4 in - 10
^
J 8608 Rear Pinion Bearing Race Installer
^
J 8611-01 Rear Pinion Bearing Race Installer
^
J 8614-01 Flange and Pulley Holding Tool
^
J 22912-B Split-Plate Bearing Puller
^
J 24433 Pinion Cone and Side Bearing Installer
^
J 33782 Pinion Oil Seal Installer
^
J 38694 Extension Housing Oil Pump/Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the differential.
3. Remove the drive pinion from the axle.
4. Press the bearing off of the pinion using the J 22912-B.
5. Remove the shim.
6. Remove the outer pinion bearing cup from the axle housing using a hammer and a brass drift in the slots provided. Move the drift back and forth
between one side of the cup and the other in order to work the cups out of the housing evenly.
