Canyon 4WD L5-3.7L (2007)
Pinion Flange: Service and Repair
Rear Drive Axle
Drive Pinion Flange/Yoke and/or Oil Seal Replacement
Tools Required
^
J 8614-01 Flange and Pulley Holding Tool
^
J 33782 Pinion Oil Seal Installer
^
J 38694 Extension Housing Oil Pump/Seal Installer
Removal Procedure
Important: Observe and mark the positions of all the driveline components, relative to the propeller shaft and the axles, prior to
disassembly. These components include the propeller shafts, drive axles, pinion flanges, output shafts, etc. Reassemble all the components
in the exact places in which you removed the parts. Follow any specifications, torque values, and any measurements made prior to
disassembly.
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the rear brake drums.
