Canyon 4WD L5-3.7L (2007)
8. Remove the yoke from the propeller shaft.
Important: When installing the special tool, the aid of an assistant will be required to position the tool between the center bearing and
propeller shaft shoulder. Ensure that the flat part of the tool is facing center bearing.
9. Install the J 44749 (1) to the propeller shaft.
1. With the aid of an assistant, pull the center bearing toward the spline part of the propeller shaft.
2. Position the tool (1) between the center bearing and the shield for the center bearing.
3. Adjust the tool so that it just comes in contact with the shoulder.
