Canyon 4WD L5-3.7L (2007)
1. Install the shift lever assembly to the control lever, aligning the set screw threaded hole with the seat (3)
2. Apply threadlock GM P/N 12345493 (Canadian P/N 10953488) to the shift lever set screw threads.
Notice: Refer to Fastener Notice.
3. Install the shift lever set screw.
Tighten the shift lever set screw to 25 N.m (18 lb ft).
4. Position the boot tabs (4) under the rear of the console opening.
5. Push downward on the front of the boot (3) in order to engage the boot retainers (2) with the floor console (1).
