gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Transfer Case Output Shaft Seal Replacement - Front|Page 10525 > < Transfer Case Output Shaft Seal Replacement - Front|Page 10523

Canyon 4WD L5-3.7L (2007)

Page 4
background image

2. Install the yoke flange to the front output shaft.
3. Lightly lubricate the NEW yoke flange O-ring seal with transfer case fluid.
4. Install the yoke flange O-ring seal.
5. Install a NEW yoke flange nut.

Notice: Refer to Fastener Notice.

6. Attach the J 8614-01 to the yoke flange.

Tighten the yoke flange nut to 137 N.m (101 lb ft).

7. Using a suitable punch, stake the yoke flange nut in 2 places.

Transfer Case Output Shaft Seal Replacement - Front|Page 10525 > < Transfer Case Output Shaft Seal Replacement - Front|Page 10523