Canyon 4WD V8-5.3L (2009)
3. With the aid of an assistant, lower the rear door down onto the body side hinge straps.
4. Install the bolts (1) retaining the rear door hinge keeper straps and tighten to 25 Nm (18 lb ft).
5. Connect the rear door wiring harness connectors and install the rear door wiring harness grommet to the body. Refer to Rear Side Door Wiring
Harness Replacement (See: Service and Repair).
6. Install the bolt retaining the rear door check link to the body and tighten to 25 Nm (18 lb ft).
7. Inspect the door for proper operation and alignment. Refer to Rear Door Adjustment (See: Adjustments).
