Canyon 4WD V8-5.3L (2009)
5. Install the release handle to the knee bolster.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the bolts that retain the release handle to the knee bolster and tighten to 1 Nm (9 lb in).
7. Route the cable as previously noted.
8. Attach the cable to the retainers on the inner fender.
9. Install the cable to the hood latch assembly.
10. Install the hood latch. Refer to Hood Primary and Secondary Latch Replacement (See: Hood Latch/Service and Repair).
11. Install the grille. Refer to Grille Replacement (See: Grille/Service and Repair).
