Canyon 4WD V8-5.3L (2009)
6. Install the bolt/cushion assembly to the number 1 and the number 2 body mount.
7. Install the bolt/cushion assembly to the number 3 body mount, short wheel base vehicles.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
8. Install the bolt/cushion assembly to the number 3 and the number 4 body mount, long wheel base vehicles.
Tighten the bolts to 115 Nm (85 lb ft).
9. Remove the jack stands.
10. Lower the vehicle.
