Canyon 4WD V8-5.3L (2009)
2. Remove the 3 screws (2) located on the lower hinge.
3. Remove the hinge from the vehicle.
Installation Procedure
1. Position the hinge to the console.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the 3 screws (2) retaining the armrest to the lower hinge. Tighten the screws to 1.5 Nm (15 lb in).
3. Install the armrest. Refer to Front Floor Console Armrest Replacement (See: ).
Front Floor Console Storage Tray Replacement
Front Floor Console Storage Tray Replacement
