Canyon 4WD V8-5.3L (2009)
1. Position the right hinge pillar trim panel over the pillar and door sill.
2. Ensure that the panel fasteners are aligned with the holes in the body.
3. Install the panel by pushing firmly against the body to seat the panel fasteners.
4. Install the right front door sill trim plate. Refer to Front Side Door Sill Trim Plate Replacement (See: Scuff Plate/Service and Repair).
Body Rear Trim Panel Replacement (Crew Cab)
Body Rear Trim Panel Replacement (Crew Cab)
Removal Procedure
1. Remove the rear seat. Refer to Rear Bench Seat Replacement (See: Seats/Service and Repair/Rear Bench Seat Replacement).
2. Remove the jack and tool storage bracket. Refer to Jack and Tool Stowage Container Bracket Replacement (See: Jack/Service and Repair).
3. Remove the rear shoulder belt guide.