Canyon 4WD V8-5.3L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Using the marks on the left and right sides of the guides to reinstall the window to the module for alignment.
5. Install the two screws (1) to each side of the guides (2).
Install the bolts, size and color to the proper location.
Tighten the screw to 3 Nm (27 lb in).
Note: Place the sunroof module on a flat protective cover, face down.
6. The sunroof window must be in the full open position to do the following:
1. Install the wind deflector.
2. Hook the wind deflector slide blocks (1) to each side.
3. Hook the wind deflector tabs (2) to the center of the upper frame.
