Canyon 4WD V8-5.3L (2009)
Power Seat Switch: Service and Repair
Lumbar Switch Replacement
Lumbar Switch Replacement
Removal Procedure
1. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion/Service and Repair/Seat
Cushion Outer Trim Panel Replacement).
2. Remove the switch bezel from the seat assembly. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (See: Service and
Repair/Driver or Passenger Seat Adjuster Switch Bezel Replacement).
3. Remove the buttons from the switch (3).
4. Release the tabs (4) that retain the seat switch (3) to the seat bezel.
5. Disconnect the lumbar switch harness (1) from the seat harness.
