Canyon 4WD V8-5.3L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the bolt securing the seat back frame to the seat cushion frame.
Tighten the rear bench seat back frame mounting bolt to 50 Nm (37 lb ft).
3. Install the seat back latch assembly. Refer to Rear Seat Back Latch Replacement (See: Seat Latch/Service and Repair).
4. Install the head restraint guides in the seat back frame by pushing the guides through the frame until the tabs lock into place.
5. Install the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Crew Cab) (See: Rear Seat Back Cushion
Cover and Pad Replacement (Crew Cab)).
