Canyon 4WD V8-5.3L (2009)
11. Install the lumbar adjustment mechanism (1) to the seat adjuster with the 2 screws (2).
12. Install the lumbar cable to the lumbar adjustment mechanism.
13. Install the seat switch bezel, if equipped. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (See: Service and Repair/Driver
or Passenger Seat Adjuster Switch Bezel Replacement).
14. Install the lumbar knob by pushing the knob straight onto the shaft, if equipped.
15. Install the recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver or Passenger Seat
Recliner Handle Replacement).
16. Install the front, rear, and side J-strips (1, 2) to the underside of the seat.
