Canyon 4WD V8-5.3L (2009)
5. Unclip the front, rear, and side J-strips (1, 2) on the underside of the seat.
6. Remove the lumbar knob by pulling the knob straight away from the seat, if equipped.
7. Remove the seat switch bezel, if equipped. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (See: Service and
Repair/Driver or Passenger Seat Adjuster Switch Bezel Replacement).
8. Remove the recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver or Passenger Seat
Recliner Handle Replacement).
9. Remove the screws (2) that retain the lumbar adjustment mechanism (1) to the seat adjuster.
10. Remove the lumbar cable from the lumbar adjustment mechanism.