Canyon 4WD V8-5.3L (2009)
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Remove the seat back latch (1) to the seat back frame with the 4 screws (2).
Tighten the rear bench seat back latch mounting screws to 12 Nm (9 lb ft).
2. Install the 2 screws (2) securing the latch release strap bracket (1) to the seat back frame.
Tighten the rear bench seat back latch release strap bracket screws to 1.5 Nm (13 lb in).
3. Install the screw securing the side trim covers to the seat cushion frame.
Tighten the rear bench seat side trim cover screw to 1.5 Nm (13 lb in).
