Canyon 4WD V8-5.3L (2009)
Power Seat Switch: Service and Repair
Power Seat Switch Replacement
Power Seat Switch Replacement
Removal Procedure
1. Remove the seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seats/Seat Cushion/Service and
Repair/Seat Cushion Outer Trim Panel Replacement).
2. Remove the switch bezel from the seat assembly. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (See: Seats/Service and
Repair/Driver or Passenger Seat Adjuster Switch Bezel Replacement).
3. Remove the buttons from the switch (2).
4. Release the tabs (1) that retain the seat switch (2) to the seat bezel.
5. Disconnect the power seat switch harness (1) from the seat harness.