Canyon 4WD V8-5.3L (2009)
Acceleration/Deceleration Sensor: Service and Repair
Longitudinal Accelerometer Replacement
Removal Procedure
1. Remove the left front seat. Refer to Front Seat Replacement - Bucket (See: Body and Frame/Seats/Service and Repair/Front Seat Replacement -
Bucket) or Split Bench Seat Replacement (See: Body and Frame/Seats/Service and Repair/Split Bench Seat Replacement).
2. Access the sensor through service slit provided in the carpet.
3. Disconnect the longitudinal accelerometer electrical connector.
4. Remove the nuts (1) from the longitudinal accelerometer.
5. Remove the longitudinal accelerometer.
Installation Procedure
