Canyon 4WD V8-5.3L (2009)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Caution).
1. Turn the ignition switch to the OFF position.
2. Disconnect the electronic brake control module (EBCM) electrical connector.
3. Clean the area around the brake pipe fittings and the EBCM and the brake pressure modulator valve (BPMV) mating surfaces of any accumulated
dirt and debris.
4. Disconnect the RF brake pipe fitting (1) from the EBCM/BPMV assembly.
Cap the brake pipe fitting and plug the BPMV outlet port to prevent brake fluid loss and contamination.
