Canyon 4WD V8-5.3L (2009)
Electronic Brake Control Module: Service and Repair
Electronic Brake Control Module Replacement
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution (See: Service Precautions/Vehicle Damage Warnings/Brake Fluid
Effects on Paint and Electrical Components Caution).
1. Turn the ignition switch to the OFF position.
2. Remove the brake pressure modulator valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement (See: Antilock Brakes / Traction
Control Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair).
3. Remove the electronic brake control module (EBCM) bolts (1).
Discard the bolts.
