Canyon 4WD V8-5.3L (2009)
2. Using the bolt as a handle, carefully install the camshaft into the engine block.
3. Remove the bolt from the front of the camshaft.
Note: Install the retainer with the sealing gasket facing the engine block.
The gasket surface on the engine block should be clean and free of dirt and/or debris.
4. Install the camshaft retainer (203) and bolts (204).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Tighten the camshaft retainer bolts.
*
Tighten the first design hex head bolts (3) to 25 Nm (18 lb ft).
*
Tighten the second design TORX(R) head bolts (4) to 15 Nm (11 lb ft).
6. Compress the timing chain tensioner guide and install the EN 46330 .