Canyon 4WD V8-5.3L (2009)
9. Apply threadlock to the threads of the bracket bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids,
Lubricants, and Sealers) for the correct part number.
10. If necessary, install the ignition coils and bracket to the rocker arm cover.
11. If necessary, install the ignition coil bracket studs to the rocker cover.
Tighten the studs to 12 Nm (106 lb in).
12. Install the heater hose bracket bolt (1) to the front of the right cylinder head.