Canyon 4WD V8-5.3L (2009)
Engine Mount: Service and Repair
Engine Mount Replacement - Right
Engine Mount Replacement - Right Side
Removal Procedure
Caution: When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal, or the crankshaft pulley. Due
to the small clearance between the oil pan and the oil pump screen, jacking against the oil pan may cause the pan to be bent against the pump
screen. This will result in a damaged oil pickup unit.
1. Remove the front tire and wheels. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
2. Remove the right side exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (LH8) (See: Exhaust System/Exhaust
Manifold/Service and Repair/Exhaust Manifold Replacement - Right Side).
3. Unbolt the air conditioning compressor and position aside. Refer to Air Conditioning Compressor Replacement (LH8) (See: Heating and Air
Conditioning/Compressor HVAC/Service and Repair)Air Conditioning Compressor Replacement (LLV, LLR) (See: Heating and Air
Conditioning/Compressor HVAC/Service and Repair).
4. Remove the air conditioning bracket bolts (1).
