Canyon 4WD V8-5.3L (2009)
Air Door Actuator / Motor: Service and Repair
Recirculation Actuator Replacement
Recirculation Actuator Replacement
Removal Procedure
1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement (See: Housing Assembly HVAC/Service and Repair).
2. Remove the recirculation actuator screws.
3. Remove the electrical connector (3) from the recirculation actuator (2).
4. Remove the recirculation actuator.
Installation Procedure
1. Install the recirculation actuator (2).