Canyon 4WD V8-5.3L (2009)
7. Remove the temperature control cable (9) from the temperature actuator cam (10).
8. Remove the temperature control cable.
Installation Procedure
1. Install the temperature cable (4).
2. Install the temperature control cable (9) to the temperature actuator cam (10).
3. Install the temperature cable to the retaining clip.
4. Install the temperature cable (4) to the temperature control cam (5).
5. Install the temperature cable (4) to the retaining clip.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the mounting screws to the HVAC control assembly. Tighten the screws to 1.9 Nm (17 lb in).
7. Install the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
