Canyon 4WD V8-5.3L (2009)
1. Install the bulbs to the backup lamp sockets.
2. Install the backup lamp rotating clockwise until the locking tab is fully seated.
3. Press the tail lamp to the rear body panel until fully seated.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the tail lamp screws (1) to the tail lamp.
Tighten the tail lamp screws (1) to 3 Nm (26 lb in).
5. Close the tailgate.