Canyon 4WD V8-5.3L (2009)
1. Connect the electrical connector to the bulb.
2. Push in and rotate the high beam headlamp (2), low beam headlamp (3) 1/4 turn clockwise in order to install the bulb.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the bolts that retain the headlamp.
Tighten the bolts to 10 Nm (89 lb in).
4. Inspect the headlamps for proper operation.
5. Install the front grille. Refer to Grille Replacement (See: Body and Frame/Grille/Service and Repair).
