Canyon 4WD V8-5.3L (2009)
4. Loosen the air cleaner outlet duct clamp (1) at the throttle body.
5. Grasp the air cleaner outlet duct near the ball stud and firmly pull up in order to disengage the duct from the ball stud.
6. Remove the air cleaner outlet duct (2) from the throttle body and the air cleaner housing.
Installation Procedure
1. Install the air cleaner outlet duct (2) to the throttle body and the air cleaner housing.
2. Ensure that the air cleaner outlet duct tab rests over the ball stud, press down on the duct tab in order to engage the duct to the ball stud.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the air cleaner outlet duct clamp (1) at the throttle body.
Tighten the clamp to 3.5 Nm (31 lb in).
