Canyon 4WD V8-5.3L (2009)
1. Install the fuel feed and EVAP pipe assembly (3) to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Position the fuel pipe bracket (5) and install the bracket bolt (6).
Tighten the bolt to 4.5 Nm (40 lb in).
3. Install the fuel feed and EVAP line clip (4) to the fuel line bracket.
4. Position the chassis fuel feed and EVAP line assembly (3) bracket tab to the crossmember.
5. Install the chassis fuel feed and EVAP line bracket bolt (2).
Tighten the bolt to 10 Nm (89 lb in).
6. Connect the EVAP line quick connect fitting (1) to the chassis EVAP line. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
