Canyon 4WD V8-5.3L (2009)
Tighten the roof rail air bag curtain bolts to 9 Nm (79 lb in).
4. Install the rear tether bolt (3).
Tighten the roof rail air bag rear tether bolt to 9 Nm (79 lb in).
5. Install the clips (3) to the pillar.
6. Install the roof rail air bag forward tether bolt (3).
Tighten the roof rail air bag forward tether bolt to 9 Nm (79 lb in).
7. Connect the roof rail air bag electrical connector (1).
8. Install the headliner. Refer to Headlining Trim Panel Replacement (Extended Cab) (See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair)Headlining Trim Panel Replacement (Regular Cab) (See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair)Headlining Trim Panel Replacement (Crew Cab) (See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair).
9. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag(s) Arming and Disarming/Service and Repair).
10. Install the head restraints from the front seats. Refer to Front Seat Head Restraint Replacement (See: Body and Frame/Seats/Head Rest/Service
and Repair/Front Seat Head Restraint Replacement).
