Canyon 4WD V8-5.3L (2009)
3. Install the pressure sensor (2) to the bottom of the passenger seat cushion frame.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the bolts that retain the ECU (1) to the bottom the passenger seat cushion frame.
Tighten the bolts to 2 Nm (18 lb in).
5. Connect the electrical connectors.
6. Install the seat cushion trim cover and pad.
7. Re-zero the inflatable restraint passenger presence system. Refer to Control Module References (See: Testing and Inspection/Programming and
Relearning).
