Canyon 4WD V8-5.3L (2009)
2. Position the side impact sensor horizontally to the door.
3. Connect the electrical connector to the side impact sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the screws which retain the side impact sensor to the door.
Tighten the screws to 9 Nm (79 lb in).
5. Fully seat the water deflector to the door.
6. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair).
7. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Air Bag Systems/Air Bag(s) Arming and Disarming/Service and Repair).
