Canyon 4WD V8-5.3L (2009)
Headlamp Switch: Service and Repair
Headlamp Switch Replacement
Removal Procedure
1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
2. Remove the screw retaining the switch to the instrument panel (I/P).
3. Partially remove the switch from the I/P.
4. Disconnect the switch electrical connector.
5. Remove the switch from the vehicle.
Installation Procedure