Canyon 4WD V8-5.3L (2009)
Impact Sensor: Service and Repair
Inflatable Restraint Vehicle Rollover Sensor Replacement
Inflatable Restraint Vehicle Rollover Sensor Replacement
Removal Procedure
Warning: Refer to SIR Warning (See: Restraint Systems/Service Precautions/SIR Warning).
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
2. Fold back the carpet in order to gain access to the sensor. Refer to Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding /
Trim/Carpet/Service and Repair).
3. Disconnect the electrical connector.
4. Remove the nuts securing the rollover sensor to the floor panel.
Installation Procedure
