Canyon 4WD V8-5.3L (2009)
Negative: Service and Repair
Battery Negative Cable Replacement (LH8) (5.3L)
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Service and Repair).
2. Remove the negative battery cable clip (2) from the lower half of the battery box.
3. Remove the negative battery cable clip (3) from the battery tray.
4. Remove the negative battery cable integral bolt (4) from the battery tray.
5. Disconnect the engine wiring harness electrical connector (6) from the battery current sensor (5).
