Canyon 4WD V8-5.3L (2009)
13. Hold the ignition lock housing positioned so the security plug actuator lever (3) also faces to the right of the key head.
14. Push the exposed end of the security plug actuator lever (3) toward the center of the lock cylinder housing (1) and hold it. Insert the coded lock
cylinder (2) with the key in it into the ignition lock cylinder housing (1) until the cap is flush with the housing.
15. Rotate the keyed lock cylinder counterclockwise slightly until it stops and detents outward slightly. The key should be able to be removed and the
lock cylinder should remain in the housing.
16. Install the retaining clip (1) onto the coded lock cylinder where it comes out of the back of the lock cylinder housing.
