Canyon 4WD V8-5.3L (2009)
Alignment: Service and Repair
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
1. Loosen the jam nut on the tie rod.
2. Rotate the inner tie rod to the required toe specification setting. Refer to Wheel Alignment Specifications (See: Specifications).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the jam nut on the tie rod to 70 Nm (52 lb ft).
4. Check the toe setting after tightening.
5. Re-adjust the toe setting if necessary.
