Canyon 4WD V8-5.3L (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Gear Inlet and Outlet Hose Replacement (LH8) (5.3L)
Removal Procedure
1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
2. Remove the engine protection shield. Refer to Engine Protection Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and
Repair).
3. Place drain pans under the vehicle as needed.
4. Disconnect the power steering gear inlet and outlet hose (1) from the power steering pump and power steering fluid reservoir assembly.
5. Remove the power steering gear inlet and outlet hose bracket bolts (2).
6. Remove the power steering gear inlet and outlet hose retaining plate bolt (1).
7. Disconnect the power steering gear inlet and outlet hose (3) from the steering gear and remove it from the vehicle.
