Canyon 4WD V8-5.3L (2009)
7. Connect the power steering hose assembly to the steering gear. Refer to Power Steering Gear Inlet and Outlet Hose Replacement (LLV, LLR) (
See: Power Steering/Power Steering Line/Hose/Service and Repair)Power Steering Gear Inlet and Outlet Hose Replacement (LH8) (See: Power
Steering/Power Steering Line/Hose/Service and Repair).
8. Install the engine protection shield, if equipped. Refer to Engine Protection Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service
and Repair).
9. Install the outer tie rod end to the steering knuckle. Refer to Steering Linkage Outer Tie Rod Replacement (See: Tie Rod/Service and
Repair/Steering Linkage Outer Tie Rod Replacement).
10. Install both of the front tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
11. Lower the vehicle.
12. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering/Power Steering Bleeding/Service and Repair).
