Canyon 4WD V8-5.3L (2009)
Arm Ball Joint Replacement (4WD, 2WD, Z71) (See: Ball Joint/Service and Repair/Upper Control Arm Ball Joint Replacement).
5. Install the outer tie rod end into the knuckle. Refer to Steering Linkage Outer Tie Rod Replacement (See: Steering/Tie Rod/Service and
Repair/Steering Linkage Outer Tie Rod Replacement).
6. Install the speed senor wiring harness in the retaining clips on the upper control arm and frame.
7. Install the brake caliper mounting bracket. Refer to Brake Caliper Bracket Replacement (See: Brakes and Traction Control/Disc Brake
System/Brake Caliper/Service and Repair/Brake Caliper Bracket Replacement).
8. Install the wheel drive shaft retaining nut to specifications. Refer to Wheel Drive Shaft Replacement (See: Transmission and Drivetrain/Drive
Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair).
9. Remove the support from the lower control arm.
10. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair)
11. Remove the support and lower the vehicle.