Canyon 4WD V8-5.3L (2009)
Stabilizer Link: Service and Repair
Front Suspension
Stabilizer Shaft Link Replacement (ZQ8, Z85)
Stabilizer Shaft Link Replacement (ZQ8, Z85)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
3. Using the proper size wrench, hold the link ball stud while removing the link nut.
4. Remove the retaining nut from the stabilizer shaft and the lower control arm.