Canyon 4WD V8-5.3L (2009)
10. Position a large screwdriver or pry bar in the cooling fins of the brake rotor and the brake caliper mounting bracket.
Note: The following service procedure is to ensure that the brake rotor is seated properly on the wheel bearing/hub assembly.
11. Tighten the mounting bolts for the brake rotor in sequence.
12. Using a torque wrench, tighten the mounting bolts to 110 Nm (81 lb ft).
13. Install the speed sensor mounting bracket and re-connect the electrical connector. Refer to Front Wheel Speed Sensor Replacement (See: Brakes
and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair/Front Wheel Speed Sensor
Replacement).
14. Check for hub/rotor/bearing LRO specifications. Refer to Disc Brake Component Specifications (See: Brakes and Traction Control/Disc Brake
System/Specifications/Disc Brake Component Specifications).
15. Install the brake caliper assembly. Refer to Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Caliper/Service and Repair/Brake Caliper Replacement).
16. Install the wheel speed sensor to the body.
17. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).