Canyon 4WD V8-5.3L (2009)
Windshield Washer Hose: Service and Repair
Windshield Washer Hose Replacement
Removal Procedure
1. Raise and support the hood.
2. Remove the washer hose from the nozzles. Refer to Washer Nozzle Replacement (See: Windshield Washer Spray Nozzle/Service and Repair).
3. Remove the hose from the air inlet panel.
4. Disconnect the hose (1) from the washer pump.
5. Install a cap on the washer pump outlet in order to prevent excessive washer solvent loss.
6. Remove the washer hose from the vehicle.
Installation Procedure
1. Position the new hose to the vehicle.
2. Remove the cap from the washer pump outlet and install the new hose to the outlet of the pump.