Canyon 4WD V8-5.3L (2009)
Installation Procedure
1. Position a new washer solvent container / coolant recovery reservoir (7) on the bench top.
2. Install the following component parts:
*
Coolant container overflow hose (1)
*
Coolant recovery reservoir cap (2)
*
Windshield washer container cap (3)
*
Coolant recovery to radiator hose (4)
*
Windshield washer pump and a new grommet (5)
*
Use clean washer solvent on the washer pump grommet to aid in the pump installation.
*
Windshield washer container lower grommet (6)
3. Position the washer solvent container / coolant recovery reservoir (1) to the engine compartment and fender flange.
4. Secure the washer hose to the washer pump spout.
5. Connect the electrical connection to the washer pump.